E-1131-T-N2P-OD-2-SIGN-L-SL Main Features:
■ The unit needs a coin/s input signal to activate
■ Top-Off with Nitrogen at the touch of FILL button
■ Converts the tyre to Nitrogen at the touch of PURGE button
■ Outdoor
■ Suit for: Motorcycle, Car
E-1131-T-N2P-OD-2-SIGN-L-SL Technical Data Summary:
Dimensions (Height*Width*Depth) |
1190mm*500mm*680mm
46.8"*19.7"*26.7" |
Packing Size (Height*Width*Depth) |
1400mm*730mm*1050mm
55.1"*28.7"*41.3" |
Net Weight |
125kg/275.0lbs |
Gross Weight |
179kg/393.6lbs |
Power Requirement |
100-240Vac 50HZ/60HZ |
Power Consumption (No Heater) |
80VA |
Operating Temperature Range |
-20°C/-4°F to 70°C/158°F |
Compressed Air Input Range |
87-123PSI/6-8.5bar/600-850kPa |
Compressed Air Input Flow |
250L/min (8.0cfm) |
Operating Range |
5-90PSI/0.3-6.2bar/35-620kPa |
Nitrogen Purity |
95-99+% |
Nitrogen Output |
39L/min (1.36cfm)@116PSI/8bar/800kPa Absorption pressure
|
Inflator Accuracy |
±1PSI/0.07bar/7kPa |
Resolution: |
1PSI/0.1bar/5kPa |
Units of Measurement |
PSI/bar/kPa |
E-1131-T-N2P-OD-2-SIGN-L-SL Specifications:
1. FILL button & PURGE button
2. Automatic zero drift adjustment
3. Remain at last setting
4. Audible and visual end of the cycle signal indicators
5. Large backlight LCD display
6. Vandal resistant mechanical switches
7. 1 Nos *9M/29.5ft filling hose
8. Locking access door with locks
9. Door recessed for extra strength and additional weatherproofing
10. The unit needs a coin/s input signal to activate
11. Number of coins to activate machine is adjustable
12. Amount of time per coin is adjustable
13. The coin/s remaining time will be displayed on the lower LCD
14. Number of coins put through the machine can be displayed on the lower LCD when turn on the unit
15. Stainless steel cabinet
16.Lights: Illuminate the sign on the top of the unit
17. Options available:
■ Heater: When the ambient temperature lower than 5°C/41°F, the heater should be supplied to the unit to ensure the nitrogen generator and inflator keep in normal good working condition
■ Bank card reader
E-1131-T-N2P-OD-2-SIGN-L-SL Operation Steps:
1. Input coin to activate the unit.
2. Set final target pressure using the + and – buttons. The top LCD screen will show the target pressure.
3. Connect air hose to tyre valve stem.
4. Press FILL button for Top-Off with Nitrogen. Press PURGE button for converting the tyre to Nitrogen.
5. When unit "beeps"and the top LCD screen flashes the target pressure, tyre inflation is complete.