Zhuhai EST M&E Equipment Co.,Ltd.
Add: NO.6898 Zhuhai Avenue, Hongqi, Zhuhai, China
Tel: +86 756 7260111
Fax: +86 756 7260555
Email: ourest@ourest.com  
Post Code: 519090

E-1175-N2P Main Features:

■ High Output, can inflate a 12.00R22.5 tyre from zero to 120PSI/8.2bar/820kPa

    in only 2.9 minutes

■ Converts up to 6 tyres to Nitrogen simultaneously at the touch of a button **

■ Fully automated, fully programmable, micro-processor controlled conversion

    system

■ Suit for: Light Truck, Bus

 

E-1175-N2P Technical Data Summary

Dimensions/Weight

Main Body

Tank

Height

1310mm/51.6"

1100mm/43.3"

Width

730mm/28.7"

400mm/15.7"

Depth

1000mm/39.4"  

400mm/15.7"

Net Weight                   

323kg/712.5lbs

38kg/83.8lbs

Gross Weight             

362kg/798.5lbs 

42kg/92.6lbs

Packing Size

Main Body

Tank

Height

1450mm/57.1"

1180mm/46.5"

Width

730mm/28.7" 

440mm/17.3"

Depth

1050mm/42.9" 

440mm/17.3"

Power Requirement 

100Vac/240Vac 50/60HZ

Power Consumption

110VA

Operating Temperature Range

-20/-4°F to 70/158°F

Max Inlet Compressed AirSupply

217PSI/15bar /1500kPa

Compressed Air Input Flow

2200L/min (68.6cfm)

Nitrogen Purity

95-99+ %

Nitrogen Output

508L/min (17.9cfm ) @ 116PSI/8bar/

800kPa Absorption pressure

Maximum Nitrogen Pressure in Tank

44PSI/3bar/300kPa

less than the Inlet Compressed Air Supply

  Maximum Operatng Pressure

  12PSI/0.8bar/80kPa

  less than the Nitrogen Pressure in Tank

  Minimum Operatng Pressure  5PSI/0.3bar/35kPa  
 Nitrogen Purges  0-9
 Inflator Accuracy  ±1PSI/0.07bar/7kPa
 Resolution  1PSI/0.1bar/5kPa
 Units of Measurement  PSI/bar/kPa

 

E-1175-N2P Specifications:

1. Generates nitrogen from your compressed air

2. 2*2 Pre-Filters

3. 118L/31.1gal (us) external nitrogen storage tank

4. Auto-start inflation

5. Automatic zero drift adjustment

6. Remain at last setting

7. Audible and visual end of the cycle signal indicators

8. Self-diagnostic features

9. Vandal resistant mechanical switches

10. Large backlight LCD display

11. 4 Nos.*8M/26ft standard hoses with single clip-on closed chuck

12. Comprehensive diagnostics and error reporting

13. Nitrogen purge and fill cycle (N2P)

14. Nitrogen purity test port

15. Adjustable over pressure setting (OPS)

16. Adjustable number of cycles

17. Adjustable lower purge pressure limit

18. 6 air outlets allow simultaneous inflation of up to 6 tyres

19. Auto Shut-Off

20. 1Nos Nitrogen Outlet to connect the unit and your tyre inflation gun/your spray gun

21.Options available:

■ 118L/31.1gal(us) tank can be customised to 2pcs 14.5L/3.8gal(us) tank 

■ No need tank to inflate 8bar/116PSI/800kPa or below pressure tyre/s

 

 

E-1175-N2P Operation Steps:

 

1. Set final target pressure using the + and - buttons. The LCD screen will show the target pressure.

2. Connect air hose(s) to tyre valve stem(s).

3. FOR TOP-OFF ONLY: Push the “FILL/PURGE” button once.

    FOR NITROGEN CONVERSION: Push and hold the “FILL/PURGE” button

    for 2 seconds until the LCD screen shows “N2P”.

4. When unit “beeps” and the LCD screen flashes the target pressure, tyre inflation is complete.

  • Name : High Pressure and High Flow Nitrogen Generator and Conversion System
  • Model : E-1175-N2P