Zhuhai EST M&E Equipment Co.,Ltd.
Add: NO.6898 Zhuhai Avenue, Hongqi, Zhuhai, China
Tel: +86 756 7260111
Fax: +86 756 7260555
Email: ourest@ourest.com  
Post Code: 519090

E-1135-N2P Main Features:

■ Converts the tyre to Nitrogen at the touch of a button **

■ Auto-Start Inflation *

■ Over Pressure Setting (OPS)

■ Single Tyre Application

■ Suit for: Motorcycle, Car

 

E-1135-N2P Technical Data Summary

Dimensions (Height*Width*Depth)

1255mm*720mm*435mm

49.4"*28.3"*17.1"

Net Weight

89kg/196.2lbs

Gross Weight

106kg/233.7lbs

Packing Size (height*Width*Depth)

1380mm*730mm*510mm

54.3"*28.7"*20.1"

Power Requirement

100-240Vac  50/60HZ

Power Consumption

30VA

Operating Temperature Range

-20℃/-4°F to 70℃/158°F

Compressed Air Input Range

87-123PSI/6-8.5bar/600-850kPa

Compressed Air Input Flow

250L/min (8.0cfm)

Nitrogen Purity

95-99+%

Nitrogen Output

58L/min(2.0cfm)@116PSI/8bar/800kPa

Absorption pressure

Maximum Nitrogen Pressure in

Tank

102PSI/7bar/700kPa

Operating Range

5-90PSI/0.3-6.2bar/35-620kPa

Resolution

1PSI/0.1bar/5kPa

Units of Measurement

PSI/bar/kPa

 

E-1135-N2P Specifications:

1. Generates nitrogen from your compressed air

2. 2 Pre-Filters

3. 50L/13.2gal (us) internal nitrogen storage tank

4. Auto-start inflation

5. Automatic zero drift adjustment

6. Remain at last setting

7. Audible and visual end of the cycle signal indicators

8. Self-diagnostic features

9. Vandal resistant mechanical switches

10. Large backlight LCD display

11. 1 Nos.*10M/32.8ft standard hose with single clip-on open type chuck

12. Comprehensive diagnostics and error reporting

13. Nitrogen purge and fill cycle (N2P)

14. Nitrogen purity test port

15. Adjustable over pressure setting (OPS)

16. Adjustable number of cycles

17. Adjustable lower purge pressure limit

18. Auto Shut-Off

19. 1Nos Nitrogen Outlet to connect the unit and your tyre inflation gun

 

E-1135-N2P Operation Steps:

1. Set final target pressure using the + and - buttons. The LCD screen will show the target pressure.

2. Connect air hose to tyre valve stem.

3. FOR TOP-OFF ONLY: Push the “FILL/PURGE” button once. 

    FOR NITROGEN CONVERSION: Push and hold the “FILL/PURGE” button for 2 seconds until the LCD screen shows “N2P”.

4. When unit “beeps” and the LCD screen flashes the target pressure, tyre inflation is complete.

  • Name : Nitrogen Generator and Conversion System for Single Tyre Application
  • Model : E-1135-N2P