Zhuhai EST M&E Equipment Co.,Ltd.
Add: NO.6898 Zhuhai Avenue, Hongqi, Zhuhai, China
Tel: +86 756 7260111
Fax: +86 756 7260555
Email: ourest@ourest.com  
Post Code: 519090

E-012-OD Main Features:

■ 174PSI/12bar/1200kPa Output pressure make the unit a fit for almost any

    size automotive service facility **

■ Rugged and durable diecast aluminium enclosure for inflator head

■ Fully automated, fully programmable, micro-processor controlled conversion

   system

■ Suit for: Car, Light Truck, Bus *

 

E-012-OD Technical Data Summary

Dimensions (Height*Width*Depth)      1260mm*360mm*360mm  

                                                                      49.6"*14.2"*14.2"

Net Weight                                                 17.5kg/38.6lbs

Gross Weight                                             21kg/44.6lbs

Packing Size (Height*Width*Depth)      225mm*1290mm*400mm  

                                                                      8.9"*50.8"*15.7"

Power Requirement                                100-240Vac  50/60HZ

Power Consumption                               23VA

Operating Temperature Range            -20℃/-4°F to 70℃/158°F

MaxInletAir/Nitrogen Supply                   217PSI/15bar/1500kPa

Operating Range                                     5-174PSI/0.3-12bar/35-1200kPa

Accuracy                                                    ±1PSI/0.07bar/7kPa

Resolution                                                1PSI/0.1bar/5kPa

Units of Measurement                            PSI/bar/kPa

 

 

E-012-OD Specifications:

1. Auto-start inflation

2. Automatic zero drift adjustment

3. Remain at last setting

4. Comprehensive diagnostics and error reporting

5. Audible and visual end of the cycle signal indicators

6. Large backlight LCD display

7. Vandal resistant mechanical switches

8.Suits standard nitrogen bottle/Direct nitrogen supply from generator/Air

   compressor

9. 1 Nos.*10M/32.8ft standard hose with single clip-on open type chuck

10. Options available:

■ Stainless steel cabinet

■ Additional heater

■ Additional water tap

■ OPS function is available

■ Remove E-012-OD ON/OFF switch

 

E-012-OD Operation Steps:

1. Set final target pressure using the + and - buttons. The LCD screen will show the target pressure.

2. Connect air hose to tyre valve stem.

3. When unit “beeps” and the LCD screen flashes the target pressure, tyre

    inflation is complete.

4. If tyre has zero pressure, the “FILL” button must be pressed to commence

    inflation.

  • Name : Pedestal Automatic Digital Tyre Inflator
  • Model : E-012-OD