Zhuhai EST M&E Equipment Co.,Ltd.
Add: NO.6898 Zhuhai Avenue, Hongqi, Zhuhai, China
Tel: +86 756 7260111
Fax: +86 756 7260555
Email: ourest@ourest.com  
Post Code: 519090

E-1136 Main Features:

■ Pump the air from the tyre by the internal vacuum generator before nitrogen inflation *

■ Auto-Start Inflation *

■ Single Tyre Application

■ Suit for: Car

 

E-1136 Technical Data Summary

Dimensions (Height*Width*Depth)

1255mm*700mm*435mm

49.4"*27.6"*17.1"

Net Weight

87kg/191.8lbs

Gross Weight

104kg/229.3lbs

Packing Size 

(Height*Width*Depth)

1380mm*730mm*510mm

54.3"*28.7*20.1"

Power Requirement

100-240Vac 50/60HZ 

Power Consumption

30VA

Operating Temperature Range

0/32°F to 50/122°F

Compressed Air Input Range

87-123PSI/6-8.5bar /600-850kPa

Compressed Air Input Flow

500L/min (17.0cfm)

Nitrogen Purity 

95-99+%

Nitrogen Output

58L/min (2.0cfm) @116PSI/8bar/800kPa 

Absorption pressure

Maximum Nitrogen Pressure in Tank

102PSI/7bar/700kPa

Operating Range

15-72PSI/1-5bar/0.1-0.5Mpa/1-5kgf/cm2

Resolution

1PSI/0.1bar/0.01Mpa/0.1kgf/cm2

Units of Measurement 

PSI/bar/Mpa/kgf/cm2

 

E-1136 Specifications:

1. Generates nitrogen from your compressed air

2. 2 Pre-Filters

3. 50L/13.2gal (us) internal nitrogen storage tank

4. Auto-start inflation

5. Remain at last setting

6. Audible and visual end of the cycle signal indicators

7. LED display

8. 1 Nos.*10m/32.8ft standard hose with single clip-on open tyre chuck

9. Nitrogen purity test port

10. 1Nos Nitrogen Outlet to connect the unit and your tyre inflation gun

11. To increase the tyre nitrogen purity, the valve core must be removed

      manually and allow all the air to escape from the tyre. Before inflate

      tyre with nitrogen, firstly the unit will pump the residualair from the tyre

      by the internal vacuum generator then inflate nitrogen to the target tyre

      pressure

 

E-1136 Operation Steps:

1. Remove the tyre valve core to exhaust the residual air from the tyre, then re-fit the tyre valve core.

2. Set final target pressure using the + and - buttons. The upper LED screen will show the target pressure.

3. Connect air hose to tyre valve stem.

4. Press "START" key.

5. When unit “beeps” and the upper LED screen flashes “END”, tyre inflation is complete.

  • Name : Vacuum Nitrogen Generator and Inflator
  • Model : E-1136