Zhuhai EST M&E Equipment Co.,Ltd.
Add: NO.6898 Zhuhai Avenue, Hongqi, Zhuhai, China
Tel: +86 756 7260111
Fax: +86 756 7260555
Email: ourest@ourest.com  
Post Code: 519090

E-1160-N2P Main Features:

■ Converts up to 4 tyres to Nitrogen simultaneously at the touch of a button **

■ Save 50% time than single tyre inflation **

■ Fully automated, fully programmable, micro-processor controlled conversion system

■ Suit for: Car, Light Truck

 

E-1160-N2P Technical Data Summary

Dimensions (Height*Width*Depth)

1310mm*720mm*620mm

51.6"*28.3"*24.4"

Net Weight

120kg/264.6lbs

Gross Weight

145kg/319.7lbs

Packing Size 

(Height*Width*Depth)

1450mm*730mm*670mm

57.1"*28.7"*26.4"

Power Requirement

100-240Vac  50/60HZ

Power Consumption

35VA

Operating Temperature Range

-20/-4°F to 70/158°F

Compressed Air Input Range

87-123PSI/6-8.5bar /600-850kPa

Compressed Air Input Flow

500L/min (17.0cfm)

Nitrogen Purity 

95-99+%

Nitrogen Output

93L/min(3.3cfm)@116PSI/8bar

/800kPa Absorption pressure

Maximum Nitrogen Pressure in Tank

102PSI/7bar/700kPa

Operating Range

5-90PSI/0.3-6.2bar/35-620kPa

Over Pressure Setting Range

0-29PSI/0-2.0bar/0-200kPa

Units of Measurement 

PSI/bar/kPa

Nitrogen Purges 0-9
Inflator Accuracy ±1PSI/0.07bar/7kPa
Resolution 1PSI/0.1bar/5kPa
Units of Measurement PSI/bar/kPa

 

E-1160-N2P Specifications:

1. Generates nitrogen from your compressed air

2. 2 Pre-Filters

3. 50L/13.2gal (us) internal nitrogen storage tank

4. Auto-start inflation

5. Automatic zero drift adjustment

6. Remain at last setting

7. Audible and visual end of the cycle signal indicators

8. Self-diagnostic features

9. Vandal resistant mechanical switches

10. Large backlight LCD display

11. 4 Nos.*8M/26ft standard hoses with single clip-on closed chuck

12. Comprehensive diagnostics and error reporting

13. Nitrogen purge and fill cycle (N2P)

14. Nitrogen purity test port

15. Adjustable over pressure setting (OPS)

16. Adjustable number of cycles

17. Adjustable lower purge pressure limit

18. 4 air outlets allow simultaneous inflation of up to 4 tyres

19. Auto Shut-Off

20. 1Nos. Nitrogen Outlet to connect the unit and your tyre inflation gun

 

E-1160-N2P Operation Steps:

1. Set final target pressure using the + and - buttons. The LCD screen will show the target pressure.

2. Connect air hose(s) to tyre valve stem(s).

3. FOR TOP-OFF ONLY: Push the “FILL/PURGE” button once.

FOR NITROGEN CONVERSION: Push and hold the “FILL/PURGE” button for 2 seconds until the LCD screen shows “N2P”.

4. When unit “beeps” and the LCD screen flashes the target pressure, tyre inflation is complete.

  • Name : Nitrogen Generator and Conversion System for 4 Tyres Simultaneous Inflation
  • Model : E-1160-N2P