

Zhuhai EST M&E Equipment Co.,Ltd.
Add: NO.6898 Zhuhai Avenue, Hongqi, Zhuhai, China
Mob: +86 13709686750
Tel: +86 756 7260111
Fax: +86 756 7260555
Email: ourest@ourest.com
Post Code: 519090
Pedestal Automatic Digital Tyre Inflator
E-012-OD Technical Data Summary
Dimensions (Height*Width*Depth) 1260mm*360mm*360mm
49.6"*14.2"*14.2"
Net Weight 17.5kg/38.6lbs
Gross Weight 21kg/44.6lbs
Packing Size (Height*Width*Depth) 225mm*1290mm*400mm
8.9"*50.8"*15.7"
Power Requirement 100-240Vac 50/60HZ
Power Consumption 23VA
Operating Temperature Range -20℃/-4°F to 70℃/158°F
MaxInletAir/Nitrogen Supply 217PSI/15bar/1500kPa
Operating Range 5-174PSI/0.3-12bar/35-1200kPa
Accuracy ±1PSI/0.07bar/7kPa
Resolution 1PSI/0.1bar/5kPa
Units of Measurement PSI/bar/kPa
E-012-OD Specifications:
1. Auto-start inflation
2. Automatic zero drift adjustment
3. Remain at last setting
4. Comprehensive diagnostics and error reporting
5. Audible and visual end of the cycle signal indicators
6. Large backlight LCD display
7. Vandal resistant mechanical switches
8.Suits standard nitrogen bottle/Direct nitrogen supply from generator/Air
compressor
9. 1 Nos.*10M/32.8ft standard hose with single clip-on open type chuck
10. Options available:
■ Stainless steel cabinet
■ Additional heater
■ Additional water tap
■ OPS function is available
■ Remove E-012-OD ON/OFF switch
E-012-OD Operation Steps:
1. Set final target pressure using the + and - buttons. The LCD screen will show the target pressure.
2. Connect air hose to tyre valve stem.
3. When unit “beeps” and the LCD screen flashes the target pressure, tyre
inflation is complete.
4. If tyre has zero pressure, the “FILL” button must be pressed to commence
inflation.
Related products












WRITE A MESSAGE TO US
Copyright ©2020 Zhuhai EST M&E Equipment Co.,Ltd. All Rights Reserved. All Rights Reserved. 粤ICP备12040711号 Powered by:300.cn