

Zhuhai EST M&E Equipment Co.,Ltd.
Add: NO.6898 Zhuhai Avenue, Hongqi, Zhuhai, China
Mob: +86 13709686750
Tel: +86 756 7260111
Fax: +86 756 7260555
Email: ourest@ourest.com
Post Code: 519090
Portable and Smart Nitrogen Generator and Conversion System for 2 Tyres Simultaneous Inflation
E-1135B-N2P Technical Data Summary
Dimensions (Height*Width*Depth) |
1260mm*450mm*590mm 49.6"*17.7"*23.2" |
Net Weight |
72kg/159lbs |
Gross Weight |
89kg/196lbs |
Packing Size (Height*Width*Depth) |
1380mm*730mm*510mm 54.3"*28.7"*20.1" |
Power Requirement |
100-240Vac 50/60HZ |
Power Consumption |
30VA |
Operating Temperature Range |
-20℃/-4°F to 70℃/158°F |
Compressed Air Input Range |
87-123PSI/6-8.5bar /600-850kPa |
Compressed Air Input Flow |
250L/min (8.0cfm) |
Nitrogen Purity |
95-99+% |
Nitrogen Output |
61L/min(2.1cfm)@116PSI/8bar /800kPa Absorption pressure |
Maximum Nitrogen Pressure in Tank |
102PSI/7bar/700kPa |
Operating Range |
5-90PSI/0.3-6.2bar/35-620kPa |
Resolution |
1PSI/0.1bar/5kPa |
Units of Measurement |
PSI/bar/kPa |
E-1135B-N2P Specifications:
1. Generates nitrogen from your compressed air
2. 1 Pre-Filter
3. Internal nitrogen storage tank
4. Auto-start inflation
5. Automatic zero drift adjustment
6. Remain at last setting
7. Audible and visual end of the cycle signal indicators
8. Self-diagnostic features
9. Vandal resistant mechanical switches
10. Large backlight LCD display
11. 2 Nos.*8M/26ft standard hoses with single clip-on closed chuck
12. Comprehensive diagnostics and error reporting
13. Nitrogen purge and fill cycle (N2P)
14. Nitrogen purity test port
15. Adjustable over pressure setting (OPS)
16. Adjustable number of cycles
17. Adjustable lower purge pressure limit
18. 2 air outlets allow simultaneous inflation of up to 2 tyres
19. 1Nos. Nitrogen Outlet to connect the unit and your tyre inflation gun
E-1135B-N2P Operation Steps:
1. Set final target pressure using the + and - buttons. The LCD screen will show the target pressure.
2. Connect air hose(s) to tyre valve stem(s).
3. FOR TOP-OFF ONLY: Push the “FILL/PURGE” button once.
FOR NITROGEN CONVERSION: Push and hold the “FILL/PURGE” button for 2 seconds until the LCD screen shows “N2P”.
4. When unit “beeps” and the LCD screen flashes the target pressure, tyre inflation is complete.
Related products












WRITE A MESSAGE TO US
Copyright ©2020 Zhuhai EST M&E Equipment Co.,Ltd. All Rights Reserved. All Rights Reserved. 粤ICP备12040711号 Powered by:300.cn