

Zhuhai EST M&E Equipment Co.,Ltd.
Add: NO.6898 Zhuhai Avenue, Hongqi, Zhuhai, China
Mob: +86 13709686750
Tel: +86 756 7260111
Fax: +86 756 7260555
Email: ourest@ourest.com
Post Code: 519090
High Pressure and High Flow Nitrogen Generator and Conversion System
E-1175-N2P Technical Data Summary
Dimensions/Weight |
Main Body |
Tank |
Height |
1310mm/51.6" |
1100mm/43.3" |
Width |
730mm/28.7" |
400mm/15.7" |
Depth |
1000mm/39.4" |
400mm/15.7" |
Net Weight |
323kg/712.5lbs |
38kg/83.8lbs |
Gross Weight |
362kg/798.5lbs |
42kg/92.6lbs |
Packing Size |
Main Body |
Tank |
Height |
1450mm/57.1" |
1180mm/46.5" |
Width |
730mm/28.7" |
440mm/17.3" |
Depth |
1050mm/42.9" |
440mm/17.3" |
Power Requirement |
100Vac/240Vac 50/60HZ |
|
Power Consumption |
110VA |
|
Operating Temperature Range |
-20℃/-4°F to 70℃/158°F |
|
Max Inlet Compressed AirSupply |
217PSI/15bar /1500kPa |
|
Compressed Air Input Flow |
2200L/min (68.6cfm) |
|
Nitrogen Purity |
95-99+ % |
|
Nitrogen Output |
508L/min (17.9cfm ) @ 116PSI/8bar/ 800kPa Absorption pressure |
|
Maximum Nitrogen Pressure in Tank |
44PSI/3bar/300kPa less than the Inlet Compressed Air Supply |
|
Maximum Operatng Pressure |
12PSI/0.8bar/80kPa less than the Nitrogen Pressure in Tank |
|
Minimum Operatng Pressure | 5PSI/0.3bar/35kPa | |
Nitrogen Purges | 0-9 | |
Inflator Accuracy | ±1PSI/0.07bar/7kPa | |
Resolution | 1PSI/0.1bar/5kPa | |
Units of Measurement | PSI/bar/kPa |
E-1175-N2P Specifications:
1. Generates nitrogen from your compressed air
2. 2*2 Pre-Filters
3. 118L/31.1gal (us) external nitrogen storage tank
4. Auto-start inflation
5. Automatic zero drift adjustment
6. Remain at last setting
7. Audible and visual end of the cycle signal indicators
8. Self-diagnostic features
9. Vandal resistant mechanical switches
10. Large backlight LCD display
11. 4 Nos.*8M/26ft standard hoses with single clip-on closed chuck
12. Comprehensive diagnostics and error reporting
13. Nitrogen purge and fill cycle (N2P)
14. Nitrogen purity test port
15. Adjustable over pressure setting (OPS)
16. Adjustable number of cycles
17. Adjustable lower purge pressure limit
18. 6 air outlets allow simultaneous inflation of up to 6 tyres
19. Auto Shut-Off
20. 1Nos Nitrogen Outlet to connect the unit and your tyre inflation gun/your spray gun
21.Options available:
■ 118L/31.1gal(us) tank can be customised to 2pcs 14.5L/3.8gal(us) tank
■ No need tank to inflate 8bar/116PSI/800kPa or below pressure tyre/s
E-1175-N2P Operation Steps:
1. Set final target pressure using the + and - buttons. The LCD screen will show the target pressure.
2. Connect air hose(s) to tyre valve stem(s).
3. FOR TOP-OFF ONLY: Push the “FILL/PURGE” button once.
FOR NITROGEN CONVERSION: Push and hold the “FILL/PURGE” button
for 2 seconds until the LCD screen shows “N2P”.
4. When unit “beeps” and the LCD screen flashes the target pressure, tyre inflation is complete.
Related products












WRITE A MESSAGE TO US
Copyright ©2020 Zhuhai EST M&E Equipment Co.,Ltd. All Rights Reserved. All Rights Reserved. 粤ICP备12040711号 Powered by:300.cn